SCAR GEL BLASTER JM V2

The JM Scar V2 has an adjustable as well as foldable stock which can be clipped to the right side of the blaster if you wish to minimize the blaster length.

This can be folded to save space.

 

You’ll also get a fore grip with an integrated spring-loaded, retractable bipod as well as a front barrel extension to give it the realistic appearance of the real FN Scar should you wish to add it.

The grip can be used to bring up the tripod and has two functions:

Grip position:

Pod position:

The magazines are the same as that of the JM gen 8 M4A1 and are therefore electronically fed. Rest assured the JM Scar V2 will be able to use the same drum magazines as well.
One feature that this blaster has over the JM gen 8 M4A1 is a magazine primer that preloads the gel balls into the gun. Once the magazine is inserted into the blaster, simply pull back the primer for 2-3 seconds and you’ll be ready to shoot. No need to blank fire the gun until the gel balls are fed into the blaster.

The upper frame is added with a manual throwing window, which can be pre-load.

 

This gel blaster SCAR V2 has a precise vision to guarantee precision in shooting.

 

The battery is placed under the support plate, and it is foldable back support, which can be folded to the right, but in order to protect the fold, it can still shoot, so the power supply line is a bit long. In the case of not folding back, it is easy to be caught by the pallet.

The JM Scar V2 have 2 mode: Safe and Auto

 

WHAT IS INCLUDED IN THE BOX OF THE GEL BLASTER JINMING SCAR V2?

1. gel baster JINMING SCAR V2
2. magazine
3. grip / pod
4. battery 7.4V
5. USB Charger
6. Packet of gel balls
7. safety glasses
8. bottle

 

HOW TO USE THIS GEL BLASTER GUN?

1. Install the product according to the instructions.
2. Soak the balls in as much water as possible for 4 to 6 hours.
3. In same time, charge the battery.
4. Place the battery.
5. Fill the magazine with gel balls.
6. Let’s go for the adventure.

INSTALLATION INSTRUCTIONS

 

1. Wire docking
2. Install the grip
3. Place the battery
4. Install the rear support folding
5. Install the muzzle, mechanical sight, barrel and fire cap

 

WHISH GEL BALLS SHOULD BE USE?

This model uses 7-8 mm gel balls. The optimal size is 7.45 mm.

You can find the perfect gel balls for this model here.

CHARGE THE BATTERY

 

Connect the battery to the USB charger. Its 3-pin charger is used for this type of battery.

Connect the USB to your computer.

When the LED turns to green, it’s OK.

 

 

PLACE THE BATTERY

 

It is necessary to place the battery in the grip.

 

FILL THE MAGAZINE WITH GEL BALLS

1. Open the magazine
2. Pouring the balls
3. Preload
4. Shot

 

WHAT IS THE PERFORMANCE OF THIS GEL BLASTER?

Shooting performance: 200-220 fps

max range of this gun: At least 20M straight and 35M about curve shooting.

You can click here to learn more about performance measurement: “How is performance measured?”

 

WHAT IS THE CAPACITY OF THE MAGAZINE?

 

The capacity of the magazine is about 200 gel balls.